Request Quote
1 877 97 CPLUS
| Image | MFG. Part # | Description | MFG. | On Hand | Price From |
|---|---|---|---|---|---|
 |
DN-FE-16H | Wire crimping tool, self-adjusting, hexagonal profile, 26 to 8 AWG capacity. For use with insulated and non-insulated wire ferrules. | - | ||
| |
DN-FE-16S | Wire crimping tool, self-adjusting, square profile, 26 to 8 AWG capacity. For use with insulated and non-insulated wire ferrules. | - | ||
| |
K70ZA000130 | Z+F wire crimping tool, multiple profile, 20 to 10 AWG capacity. For use with ring, fork, disconnect terminals. | - | ||
| |
K70ZA000113 | Z+F wire crimping tool, multiple profile, 20 to 10 AWG capacity. For use with ferrules. | - | ||
| |
K70ZA000117 | Z+F wire crimping tool, multiple profile, 10 to 4 AWG capacity. For use with ferrules. | - | ||
| |
K70ZA000118 | Z+F wire crimping tool, multiple profile, 2 to 1 AWG capacity. For use with ferrules. | - | ||
| |
9722240 | KNIPEX crimping pliers, for cutting cables, cutting copper and brass screws, stripping wire, and crimping insulated and non-insulated terminals and connectors, 9-1/4in overall length, beveled cutting edges, 18 to 10 AWG capacity. | - | ||
| |
9771180 | KNIPEX wire crimping tool, half-round profile, 23 to 5 AWG capacity. For use with ferrules. | - | ||
| |
DN-CT-SET | Modular crimping tool system, (1) DN-CT-HDL handle and (3) die sets: DN-CT-D2, DN-CT-D4 and DN-CT-D5 included. | - | ||
| |
DN-CT-HDL | DN-CT series crimping tool handle, for use with any DN-CT-Dx die set. | - | ||
| |
DN-CT-D1 | DN-CT series die set, for use with 26-22 AWG green and 12-10 AWG yellow insulated terminals and splices. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D2 | DN-CT series die set, for use with 22-14 AWG red or blue insulated terminals and splices. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D3 | DN-CT series die set, for use with 22-10 AWG non-insulated terminals, lugs, and splices. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D4 | DN-CT series die set, for use with 24-8 AWG insulated and non-insulated wire ferrules. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D5 | DN-CT series die set, for use with 6-4 AWG insulated and non-insulated wire ferrules. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D6 | DN-CT series die set, for use with 2-1/0 AWG insulated and non-insulated wire ferrules. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D7 | DN-CT series die set, for use with 22-10 AWG open-barrel non-insulated standard commercial terminals and lugs. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D8 | DN-CT series die set, for use with for 8-pin RJ45 modular connector. Purchase DN-CT-HDL handle separately. | - | ||
| |
DN-CT-D9 | DN-CT series die set, for use with for 6-pin RJ12 modular connector. Purchase DN-CT-HDL handle separately. | - | ||
| |
BM-5345 | Crimping tool set, crimping tool, case, 5 die sets for: insulated or non-insulated 22-12 AWG ferrules; 10-6 AWG ring, fork, butt and end terminals; 22-10 AWG disconnect terminals. included. | - | ||
| |
BM-534 | BM wire crimping tool, multiple profile, 22 to 10 AWG capacity. For use with ring, fork, disconnect terminals. | - | ||
| |
BM-537 | BM wire crimping tool, multiple profile, 22 to 12 AWG capacity. For use with ferrules. | - | ||
| |
BM-539 | BM wire crimping tool, multiple profile, 10 to 6 AWG capacity. For use with ferrules. | - | ||
| |
BM-533 | BM wire crimping tool, multiple profile, 8 to 2 AWG capacity. For use with ferrules. | - | ||
| |
BM-80409 | Connector assortment kit, includes crimping tool (BM-534), ring and fork terminals, butt and end connectors, plastic case. | - | ||
| |
BM-80418 | Ferrule assortment kit, includes crimping tool, assorted ferrules, and plastic case. | - |
