Your Industrial Automation & IoT Expert
0
Product Finder
Wire Stripping & Crimping Tools 24 Results Print this Page
Image MFG. Part # Description MFG. On Hand Price From
K70ZA000130 K70ZA000130 Z+F wire crimping tool, multiple profile, 20 to 10 AWG capacity. For use with ring, fork, disconnect terminals. -
K70ZA000113 K70ZA000113 Z+F wire crimping tool, multiple profile, 20 to 10 AWG capacity. For use with ferrules. -
K70ZA000117 K70ZA000117 Z+F wire crimping tool, multiple profile, 10 to 4 AWG capacity. For use with ferrules. -
K70ZA000118 K70ZA000118 Z+F wire crimping tool, multiple profile, 2 to 1 AWG capacity. For use with ferrules. -
DN-FE-16H DN-FE-16H Wire crimping tool, self-adjusting, hexagonal profile, 26 to 8 AWG capacity. For use with insulated and non-insulated wire ferrules. -
DN-FE-16S DN-FE-16S Wire crimping tool, self-adjusting, square profile, 26 to 8 AWG capacity. For use with insulated and non-insulated wire ferrules. -
DN-WS DN-WS Precision cutting and stripping tool, self-adjusting, accepts wire size 34-8 AWG. DN-WSJ insert blade included. -
DN-WSJ DN-WSJ Blade insert, replacement, accepts wire size 34-8 AWG. For use with DN-WS cutting and stripping tool. -
DN-WSVBC DN-WSVBC Blade insert, accepts wire size 28-12 AWG. For use with DN-WS cutting and stripping tool. -
DN-WSMMC DN-WSMMC Blade insert, accepts wire size 16-4 AWG. For use with DN-WS cutting and stripping tool. -
DN-WSRJ DN-WSRJ Jaw inserts, replacement. Package of 2. For use with DN-WS cutting and stripping tool. (1) upper jaw insert and (1) lower jaw insert included. -
DN-CT-HDL DN-CT-HDL DN-CT series crimping tool handle, for use with any DN-CT-Dx die set. -
DN-CT-D1 DN-CT-D1 DN-CT series die set, for use with 26-22 AWG green and 12-10 AWG yellow insulated terminals and splices. Purchase DN-CT-HDL handle separately. -
DN-CT-D2 DN-CT-D2 DN-CT series die set, for use with 22-14 AWG red or blue insulated terminals and splices. Purchase DN-CT-HDL handle separately. -
DN-CT-D3 DN-CT-D3 DN-CT series die set, for use with 22-10 AWG non-insulated terminals, lugs, and splices. Purchase DN-CT-HDL handle separately. -
DN-CT-D4 DN-CT-D4 DN-CT series die set, for use with 24-8 AWG insulated and non-insulated wire ferrules. Purchase DN-CT-HDL handle separately. -
DN-CT-D5 DN-CT-D5 DN-CT series die set, for use with 6-4 AWG insulated and non-insulated wire ferrules. Purchase DN-CT-HDL handle separately. -
DN-CT-D6 DN-CT-D6 DN-CT series die set, for use with 2-1/0 AWG insulated and non-insulated wire ferrules. Purchase DN-CT-HDL handle separately. -
DN-CT-D7 DN-CT-D7 DN-CT series die set, for use with 22-10 AWG open-barrel non-insulated standard commercial terminals and lugs. Purchase DN-CT-HDL handle separately. -
DN-CT-D8 DN-CT-D8 DN-CT series die set, for use with for 8-pin RJ45 modular connector. Purchase DN-CT-HDL handle separately. -
DN-CT-D9 DN-CT-D9 DN-CT series die set, for use with for 6-pin RJ12 modular connector. Purchase DN-CT-HDL handle separately. -
DN-CT-SET DN-CT-SET Modular crimping tool system, (1) DN-CT-HDL handle and (3) die sets: DN-CT-D2, DN-CT-D4 and DN-CT-D5 included. -
DN-CST DN-CST Precision stripping tool, accepts wire size 0.1-0.43in, for removing sheath from signal, telephone, audiovisual, instrumentation and data transmission copper and fiber optic cables. -
DN-CST-BLADE DN-CST-BLADE Blade, replacement. For use with DN-CST cable stripping tool. -
For any item showing no stock on hand, most likely we can get for YOU. Just give us a call or send us online RFQ.
© 2018 Cplus Electronics, Inc. All Rights Reserved. | Powered by Rootways
TOP