Your advantages Safety switch with guard locking and safe guard lock monitoring Integrated CES-AR electronics A special evaluation unit is not required Up to 20 AR devices can be connected in series in a chain Safety category 4 and PL e according to EN ISO 13849-1 Compatible mounting with existing safety switches The safety switch CTP combines the proven principle of operation of electromechanical safety switches with guard locking and modern transponder coded safety engineering. Thanks to the transponder technology, even a single CTP achieves category 4 / PL e according to EN ISO 13849-1, without additional fault exclusion, and meets all the requirements of EN ISO 14119. It is ideally suited to applications in which a high Performance Level and a locking force of up to 2600 N are required. More information Versatile use The CTP reliably secures safety doors and flaps on machines and systems. Thanks to the integrated guard locking and guard lock monitoring it can be used both for process protection and the protection of personnel. Its slender design permits space-saving mounting on the safety guard. With a guard locking force of 2600 N the CTP effectively prevents the opening of safety doors. The very robust plastic housing with metal head as well as the high degree of protection IP 67 / IP 69 make the CTP the all-rounder for almost every industrial usage. The CTP is suitable even for harsh, dirty environments. Mounting and principle of operation The CTP consists of two components, a safety switch and a separate actuator. The safety switch is mounted on the fixed part of the safety guard, the actuator on the movable part. The CTP can be approached from four directions. For improved insertion of the actuator, the head is equipped with an integrated funnel. This feature is particularly advantageous on unstable door designs as well as if the door is incorrectly adjusted. When the safety guard is closed, the actuator moves into the head on the safety switch. The safety